medical grade power supply box

PFC800PCX – 800 Watt Medical-Grade Power Supply

The PFC800PCX 800W ATX PSU is the solution for high-power medical device applications. This highly reliable power supply is able to run two high-end graphics cards and is ideally suited for applications that are graphics-intensive. With multiple EMC Compliances ranging from EN55011 to EN61000, the PFC800PCX is the ideal power supply to include in embedded medical devices.

Additional information

Input

Input Voltage Range: 100 to 240 Vac ±10%; Supply Overvoltage: Cat Two < 300V; Input Current: 10A max.; Frequency: 50/60 Hz; Inrush Current: 45A cold @ 240 Vac; Efficiency: 80% typ.; PFC Correction: Active > .95; Leakage Current: < 250uA @ 264 Vac 60 Hz; Input Fuses: 2X 10A 250V Line & Neutral

Output

Max. Output Power: 750W cont. 800Wp (see note 5); Hold-Up Time: > 40ms @ full load; Overvoltage Protection: +15% of set voltage; Minimum Loading: None; Cross Regulation: < 0.5%; Line Regulation: < 0.05%; Load Regulation: < 1% ± cable factor; AC Turn-On Time: < 2 sec Output Voltage (±3%) +12V +5V +3.3V -12V -5Vsb Output Current Max. 62.5A/67A 24A 24A 0.5A 3.0A/3.5A Ripple mV p-p 100 50 50 100 50

Reliability

MTBF (demonstrated): > 500,000 hours; Expected Life: > 8 years when used as specified

Environmental

Op. Temperature: 0 to 50°C; Storage Temperature: -40 to 80°C; Operational Humidity: 0 to 95% nc; Storage Humidity: 0 to 95% nc; Operational Altitude: -500 to 9840 ft; Storage Altitude: -500 to 40,000 ft Pollution Degree Class: Two

EMC Compliance

EN55011 Conducted and Radiated Emissions; EN61000-3-2 Harmonics; EN61000-3-3 Flicker; EN61000-4-2 ESD Level 3; EN61000-4-3 RF Susceptibility 10V/m; EN61000-4-4 EFT Level 3; EN61000-4-5 Surge Level 3; EN61000-4-6 RF Conducted Immunity; EN61000-4-11 Voltage Dips, Short Interruptions; EN61000-4-39 Magnetic Fields;

Standards Compliance

ATX 3.0; ISO 9001:2015; EN60601-1 / ES60601-1 3rd edition; UL file E191947; Platform Form Factors: 2018 Rev 002; Lead free RoHS and REACH compliant; ECCN# EAR99 Conflict Material Compliant; Recommended Line Cord: SJT, 3X16 or 3X14 AWG

Safety Standards

IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007); ANSI/AAMI ES60601-1:2005 (Medical Electrical; Equipment – Part 1: General Requirements for Basic; Safety and Essential Performance); CAN/CSA-C22.2 No. 60601-1 (2008) (Medical Electrical; Equipment – Part 1: General Requirements for Basic Safety and Essential Performance) Patient Protection: Two MOPP

Global P/N / SKU

3107937

Notes

1. Max. output from +5V & +3.3V = 140W. When loading the +5V and +3.3V, multiple total load by 1.2 and subtract from 750W/800W
2. Over current for +12V reset is accomplished by cycling power on signal
3. Over current for +5V, +3.3V, -12V, & +5Vsb auto resetting
4. Derate output 9W/volt input from 100 Vac to 90 Vac
5. 10s every 50s

Datasheet

Datasheet

Notes

1. Max. output from +5V & +3.3V = 140W. When loading the +5V and +3.3V, multiple total load by 1.2 and subtract from 750W/800W 2. Over current for +12V reset is accomplished by cycling power on signal 3. Over current for +5V, +3.3V, -12V, & +5Vsb auto resetting 4. Derate output 9W/volt input from 100 Vac to 90 Vac 5. 10s every 50s

PFC800PCX – 800 Watt Medical-Grade Power Supply

The PFC800PCX 800W ATX PSU is the solution for high-power medical device applications. This highly reliable power supply is able to run two high-end graphics cards and is ideally suited for applications that are graphics-intensive. With multiple EMC Compliances ranging from EN55011 to EN61000, the PFC800PCX is the ideal power supply to include in embedded medical devices.

CONTACT US NOW

SKU: 3107937 Tags: Medical Computing
RAM Technologies
medical grade power supply box

Additional information

Input

Input Voltage Range: 100 to 240 Vac ±10%; Supply Overvoltage: Cat Two < 300V; Input Current: 10A max.; Frequency: 50/60 Hz; Inrush Current: 45A cold @ 240 Vac; Efficiency: 80% typ.; PFC Correction: Active > .95; Leakage Current: < 250uA @ 264 Vac 60 Hz; Input Fuses: 2X 10A 250V Line & Neutral

Output

Max. Output Power: 750W cont. 800Wp (see note 5); Hold-Up Time: > 40ms @ full load; Overvoltage Protection: +15% of set voltage; Minimum Loading: None; Cross Regulation: < 0.5%; Line Regulation: < 0.05%; Load Regulation: < 1% ± cable factor; AC Turn-On Time: < 2 sec Output Voltage (±3%) +12V +5V +3.3V -12V -5Vsb Output Current Max. 62.5A/67A 24A 24A 0.5A 3.0A/3.5A Ripple mV p-p 100 50 50 100 50

Reliability

MTBF (demonstrated): > 500,000 hours; Expected Life: > 8 years when used as specified

Environmental

Op. Temperature: 0 to 50°C; Storage Temperature: -40 to 80°C; Operational Humidity: 0 to 95% nc; Storage Humidity: 0 to 95% nc; Operational Altitude: -500 to 9840 ft; Storage Altitude: -500 to 40,000 ft Pollution Degree Class: Two

EMC Compliance

EN55011 Conducted and Radiated Emissions; EN61000-3-2 Harmonics; EN61000-3-3 Flicker; EN61000-4-2 ESD Level 3; EN61000-4-3 RF Susceptibility 10V/m; EN61000-4-4 EFT Level 3; EN61000-4-5 Surge Level 3; EN61000-4-6 RF Conducted Immunity; EN61000-4-11 Voltage Dips, Short Interruptions; EN61000-4-39 Magnetic Fields;

Standards Compliance

ATX 3.0; ISO 9001:2015; EN60601-1 / ES60601-1 3rd edition; UL file E191947; Platform Form Factors: 2018 Rev 002; Lead free RoHS and REACH compliant; ECCN# EAR99 Conflict Material Compliant; Recommended Line Cord: SJT, 3X16 or 3X14 AWG

Safety Standards

IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007); ANSI/AAMI ES60601-1:2005 (Medical Electrical; Equipment – Part 1: General Requirements for Basic; Safety and Essential Performance); CAN/CSA-C22.2 No. 60601-1 (2008) (Medical Electrical; Equipment – Part 1: General Requirements for Basic Safety and Essential Performance) Patient Protection: Two MOPP

Global P/N / SKU

3107937

Notes

1. Max. output from +5V & +3.3V = 140W. When loading the +5V and +3.3V, multiple total load by 1.2 and subtract from 750W/800W
2. Over current for +12V reset is accomplished by cycling power on signal
3. Over current for +5V, +3.3V, -12V, & +5Vsb auto resetting
4. Derate output 9W/volt input from 100 Vac to 90 Vac
5. 10s every 50s

Datasheet

Datasheet

Notes

1. Max. output from +5V & +3.3V = 140W. When loading the +5V and +3.3V, multiple total load by 1.2 and subtract from 750W/800W 2. Over current for +12V reset is accomplished by cycling power on signal 3. Over current for +5V, +3.3V, -12V, & +5Vsb auto resetting 4. Derate output 9W/volt input from 100 Vac to 90 Vac 5. 10s every 50s

Some of our successful brand partners

Acrosser logo

Already know what you need? Request a quote.

We can customize the perfect solution to meet your embedded computing needs.

    • This field is for validation purposes and should be left unchanged.

    Latest Articles

    Featured Article
    pc security The Changing Landscape of Embedded Security

    Gone are the days when a strong firewall was all you needed to ensure your industrial systems and servers remained safe. Security programs have grown more robust over the years, forcing hackers to use more sophisticated approaches. But this also means that security measures must evolve further as well, going further than simply firewalls and […]

    View Article

    Company News

    • Global American Partners with Acrosser

      December 20, 2023

      Be it Edge computing or IoT, you want rugged PCs that can perform under pressure. Acrosser’s products are perfect for the job, and we will be partnering with them to bring these computers to our customers. AAD-W480A: A Powerful PC for AI and Edge Computing AI-based software has become quite practical in many commercial applications, […]

      View Article
    • Intel Hybrid Core: Gimmick or the Future?

      August 1, 2023

      With the 12th Gen Alder Lake lineup, Intel has introduced a new hybrid core architecture. But what exactly does a hybrid core entail? And what does it mean for embedded computing? Why the Move to Hybrid Cores? The never-ending semiconductors arms race has revolved around packing more and more cores into a single chip since […]

      View Article
    View All News

    From the Blog

    • The Changing Landscape of Embedded Security

      November 15, 2024

      Gone are the days when a strong firewall was all you needed to ensure your industrial systems and servers remained safe. Security programs have grown more robust over the years, forcing hackers to use more sophisticated approaches. But this also means that security measures must evolve further as well, going further than simply firewalls and […]

      View Article
    • Lifecycle or Lifespan – What’s More Important for Embedded Computers?

      November 4, 2024

      When investing in industrial PCs, you want to ensure that your investment would last you for a while. But which parameter decides that – the product’s lifespan, or its lifecycle? Lifespan – A Measure of Durability  The lifespan of an embedded computer (any electronic device, really) refers to the expected operating duration of the product, […]

      View Article
    View all Blogs