8-CH PoE Mobile NVR Fanless System

1 x 16-Pin terminal block connector1 x CAN Bus 2.0B (on board)
- 1 x CAN Bus 2.0B (on board)
- 1 x OBDII from optional VIOB-OBD-03 module (SAE J1939)
- 1 x CAN Bus 2.0B from optional VIOB-CAN-03 module
- 8 x Programmable GPIO
(4 x Digital inputs, w/ optional 3KV isolation protection)
Input voltage (source type): 5VDC TTL (default)
Input voltage (external type): 3~12VDC
(4 x Digital outputs, w/ optional 3KV isolation protection)
Digital output (source type): 5VDC TTL (default), max current: 20mA
Digital output (external type): 3~24VDC, max current: 150mA

Power over Ethernet
•8-Port RJ45 for 10/100/1000 Mbps PoE IEEE 802.3af conformity, total60W

GNSS and On Board Sensor
• 1 x Default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou
• Optional modules with Dead Reckoning available
•Built-in G-sensor

Environment
• Vibration (SSD/HDD):
- Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
- Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
• Shock (SSD/HDD):
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
- Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g

8 x RJ45 10/100/1000 Mbps PoE ports with LED, 2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED

Fanless Embedded System

Not Sold Separately

2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out

Embedded

1 x 9~36VDC input with ignition and 40W typical power consumption

All popular Operating System Software including: Windows 7/WES7/Windows 8/WES8/Windows 10/Linux kernel 3.X Not all features are guaranteed to work under every O/S

2 x DDR3L SO-DIMM socket support 1600MHz

1 x Full size mini-PCIe socket (USB 2.0), 1 x Full size mini-PCIe socket (USB 2.0 + PCIe),1 x Half size mini-PCIe socket (USB 2.0 + PCIe)

1708193

2-Channel 204-pin DDR3L SO-DIMM socket support 1600MHz up to 16GB, default 2GB industrial grade memory

via Gigabit LAN connection

2 x 2.5” SATA 3.0 removable HDD/SSD trays

6th generation Intel® Core™ dual core i7-6600U, 2.6GHz/i3-6100U, 2.3GHz

Not Sold Separately

Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode

2 x USB type A USB 3.0 port

1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz

Nexcom

1 x CFast

16 GB

MVS 5603-C8SK

2 x 2.5” SATA 3.0 removable HDD/SSD trays

260mm (W) x 196mm (D) x 91mm (H) (10.24” x 7.72” x 3.58”)

1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz, 1 x HDMI port, resolution up to 2560 x 1600 @60Hz

6 x LED indicators for power/storage/WLAN/WWAN/status/health

Yes

1 x HDMI port, resolution up to 2560 x 1600 @60Hz

1 x Reset button

Aluminum

No

-30°C~60°C (w/ industrial SSD) with air flow

2gb installed

1 x CFast socket with cover, 2 x Phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out, 2 x Externally accessible SIM card sockets

MVS 5603-7C8SK (SKU# 1708193A):
6th generation Intel® Core™ dual core i7-6600U, 2.6GHz, 2GB DDR3L industrial grade SO-DIMM

MVS 5603-3C8SK (SKU# 1708193B):
6th generation Intel® Core™ daul core i3-6100U, 2.3GHz, 2GB DDR3L industrial grade SO-DIMM

-40°C~80°C

2 x Antenna holes for WWAN/WLAN/BT/GPS

10%~90%, non-condensing

2 x DB-9 RS-232, 1 x DB-9 RS-232/422/485 (RI/5V/12V selectable)

Dimensions:260mm (W) x 196mm (D) x 91mm (H) (10.24” x 7.72” x 3.58”)

CPU:6th generation Intel® Core™ dual core i7-6600U, 2.6GHz/i3-6100U,2.3GHz

BIOS::Embedded

Memory:2-Channel 204-pin DDR3L SO-DIMM socket support 1600MHz up to16GB, default 2GB industrial grade memory

Expansion:1 x Full size mini-PCIe socket (USB 2.0)1 x Full size mini-PCIe socket (USB 2.0 + PCIe)1 x Half size mini-PCIe socket (USB 2.0 + PCIe)

Storage Controller:2 x 2.5” SATA 3.0 removable HDD/SSD trays, 1 x CFast

Video:DB-15 VGA, resolution up to 2560 x 1600 @60Hz,1 x HDMI port, resolution up to 2560 x 1600 @60Hz

USB:4 x USB type A USB 3.0 port

Serial Ports:2 x DB-9 RS-232, 1 x DB-9 RS-232/422/485 (RI/5V/12V selectable)

TV-Out:HDMI

LAN:8 x RJ45 10/100/1000 Mbps PoE ports with LED, 2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED

Power::1 x 9~36VDC input with ignition and 40W typical power consumption

4kg

2 x USB type A USB 3.0 port

8 x RJ45 10/100/1000 Mbps PoE ports with LED, 2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED

1 x 9~36VDC input with ignition and 40W typical power consumption,1 x 12VDC output (2A) + SM Bus + 2 x MDI + power button

1 x DB9 connector for optional DR signal input, 2 x MDO and iButton1 x 16-Pin terminal block connector1 x CAN Bus 2.0B (on board)*See Notes for full Details*

CE, FCC