MF10- 3.5″ SBC with Tiger Lake SoC Processor and Long Lifecycle

With an 11th Generation Intel® Tiger Lake Core i5-1145G7E SoC Processor and Intel® Iris Graphics, this small board really delivers and is ideal for Factory Automation, POS, and Security.  The MF10 has two LAN, seven USB and allows for wide voltage (+12V - 24V).  This board's expected lifecycle is through Q3'2035.

Additional information

CPU

Intel® Core i5-1145G7E

Memory Type

260-pin DDR4 3200MHz SO-DIMM

Memory Slots

2

Maximum Memory Supported

64GB

Integrated Graphics

Intel® Iris® Xe Graphics

Video

1 x HDMI

LAN Ports

1 x Intel I225-V PCIe 2.5GbE, 1 x Intel I219-LM PHY Gigabit LAN (iAMT 12.0)

Serial ATA (SATA)

1 x SATA III

GPIO Interface

1 x 8-bit GPIO Header

TPM

Intel fTPM 2.0 (PTT) Trusted Computing Firmware Onboard NUVOTON TPM v2.0 available for special order

Extended Interface

1 x M.2 M-Key (2242/2280, PCIe 4.0 x4 NVMe & SATA), 1 M.2 E-Key (2230, USB and PCIe CNVi WiFi), 1 M.2 B-Key (3042/3052, USB and PCIe for SIM)

Rear I/O

1 x 3.5mm Line-out & MIC-in Audio Combo Jack, 1 x RJ45 LAN (10/100/1000/2500), 1 x RJ45 LAN (10/100/1000), 3 x USB 3.2 Gen 2 (10 Gb/s),, 1 x USB 2.0, 2 x HDMI 2.0b (4096 * 2160 @ 60Hz, 4K HDR), 2 x USB 3.2 Gen 2 Type-C for DP 1.4 (4096 * 2304 @ 60Hz), 1 x +12V – 24V 2.5mm Diameter DC Power Jack,1 x Nano SIM Socket

Internal I/O

1 x 6-pin PS2 Keyboard Mouse Header, 1 x 4-pin SMBUS Header, 1 x 4-pin Fan Header, 1 x AT/ATX Mode Jumper, 1 x 4-pin SATA Power Output (Male), 1 x 2-pin +12V – 24V Alternate Power-In, 1 x SATA3 6Gb/s Connector, 1 x Serial Header (RS232), 1 x USB Pin Headers for 2 additional USB 2.0 Ports, 1 x 40-pin eDP (4096 * 2304 @ 60Hz), 1 x 8-bit GPIO Header,1 x 4-pin 3W Amplifier Header,

Power Requirement

*See Ordering Options Tab for Information

Operating Temperature

0 ~ 60-° C (32-° F ~ 140-° F)

Storage Temperature

-20 ~ 85 ºC (-4 ~ 185 ºF)

Relative Humidity

10 ~ 90% (non-condensing)

OS Software Supported

Windows 10 64-bit, Windows 10 IoT Enterprise 64-bit, Windows 11 64-bit, Windows 11 IoT Enterprise 64-bit, CentOS 8.2_2004, RedHat 8.2, Fedora 33.1.2, OpenSUSE 15.2, Ubuntu 20.04.1

Global P/N / SKU

3308939

Ordering Options/Notes

3308939A: MF10-20 without onboard TPM

3308939B: MF10-22 with onboard TPM

Cables included: SATA Power Cable, COM Cable, SATA Data Cable

 

*External Power Supply – the board can be powered with a +12 – 24V external power supply though a DC connector on the back panel. The rear +12 – 24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12 – 24V and the shell is GND. A minimum of 90 Watts power adapter is recommended.

Internal Power Supply – the board can alternatively be powered via the internal +12 – 24V 2-pin power connector, where pin 1 is +12 – 24V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.

Caution: There is no isolation circuitry between the external +12 – 24V DC jack and the internal 2-pin power connector. It is the system integrator’s responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12 – 24V DC jack is covered if the internal 2-pin power connector is to be used.

 

Datasheet

Datasheet

Ordering Options/Notes

3308939A: MF10-20 without onboard TPM 3308939B: MF10-22 with onboard TPM Cables included: SATA Power Cable, COM Cable, SATA Data Cable   *External Power Supply – the board can be powered with a +12 - 24V external power supply though a DC connector on the back panel. The rear +12 - 24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12 - 24V and the shell is GND. A minimum of 90 Watts power adapter is recommended. Internal Power Supply – the board can alternatively be powered via the internal +12 - 24V 2-pin power connector, where pin 1 is +12 - 24V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply. Caution: There is no isolation circuitry between the external +12 - 24V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12 - 24V DC jack is covered if the internal 2-pin power connector is to be used.  

MF10- 3.5″ SBC with Tiger Lake SoC Processor and Long Lifecycle

With an 11th Generation Intel® Tiger Lake Core i5-1145G7E SoC Processor and Intel® Iris Graphics, this small board really delivers and is ideal for Factory Automation, POS, and Security.  The MF10 has two LAN, seven USB and allows for wide voltage (+12V – 24V).  This board’s expected lifecycle is through Q3’2035.

CONTACT US NOW

Board * 

Memory

M.2 NVMe SSD

2.5″ SATA SSD

Operating System (Only available if a storage device is selected from above.)

Testing (Only available if memory is included at time of purchase.)

SKU: 3308939 Tags: Industrial Automation, Internet of Things (IoT), Long Life, Point of Sale, small form factor
Jetway

Additional information

CPU

Intel® Core i5-1145G7E

Memory Type

260-pin DDR4 3200MHz SO-DIMM

Memory Slots

2

Maximum Memory Supported

64GB

Integrated Graphics

Intel® Iris® Xe Graphics

Video

1 x HDMI

LAN Ports

1 x Intel I225-V PCIe 2.5GbE, 1 x Intel I219-LM PHY Gigabit LAN (iAMT 12.0)

Serial ATA (SATA)

1 x SATA III

GPIO Interface

1 x 8-bit GPIO Header

TPM

Intel fTPM 2.0 (PTT) Trusted Computing Firmware Onboard NUVOTON TPM v2.0 available for special order

Extended Interface

1 x M.2 M-Key (2242/2280, PCIe 4.0 x4 NVMe & SATA), 1 M.2 E-Key (2230, USB and PCIe CNVi WiFi), 1 M.2 B-Key (3042/3052, USB and PCIe for SIM)

Rear I/O

1 x 3.5mm Line-out & MIC-in Audio Combo Jack, 1 x RJ45 LAN (10/100/1000/2500), 1 x RJ45 LAN (10/100/1000), 3 x USB 3.2 Gen 2 (10 Gb/s),, 1 x USB 2.0, 2 x HDMI 2.0b (4096 * 2160 @ 60Hz, 4K HDR), 2 x USB 3.2 Gen 2 Type-C for DP 1.4 (4096 * 2304 @ 60Hz), 1 x +12V – 24V 2.5mm Diameter DC Power Jack,1 x Nano SIM Socket

Internal I/O

1 x 6-pin PS2 Keyboard Mouse Header, 1 x 4-pin SMBUS Header, 1 x 4-pin Fan Header, 1 x AT/ATX Mode Jumper, 1 x 4-pin SATA Power Output (Male), 1 x 2-pin +12V – 24V Alternate Power-In, 1 x SATA3 6Gb/s Connector, 1 x Serial Header (RS232), 1 x USB Pin Headers for 2 additional USB 2.0 Ports, 1 x 40-pin eDP (4096 * 2304 @ 60Hz), 1 x 8-bit GPIO Header,1 x 4-pin 3W Amplifier Header,

Power Requirement

*See Ordering Options Tab for Information

Operating Temperature

0 ~ 60-° C (32-° F ~ 140-° F)

Storage Temperature

-20 ~ 85 ºC (-4 ~ 185 ºF)

Relative Humidity

10 ~ 90% (non-condensing)

OS Software Supported

Windows 10 64-bit, Windows 10 IoT Enterprise 64-bit, Windows 11 64-bit, Windows 11 IoT Enterprise 64-bit, CentOS 8.2_2004, RedHat 8.2, Fedora 33.1.2, OpenSUSE 15.2, Ubuntu 20.04.1

Global P/N / SKU

3308939

Ordering Options/Notes

3308939A: MF10-20 without onboard TPM

3308939B: MF10-22 with onboard TPM

Cables included: SATA Power Cable, COM Cable, SATA Data Cable

 

*External Power Supply – the board can be powered with a +12 – 24V external power supply though a DC connector on the back panel. The rear +12 – 24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12 – 24V and the shell is GND. A minimum of 90 Watts power adapter is recommended.

Internal Power Supply – the board can alternatively be powered via the internal +12 – 24V 2-pin power connector, where pin 1 is +12 – 24V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.

Caution: There is no isolation circuitry between the external +12 – 24V DC jack and the internal 2-pin power connector. It is the system integrator’s responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12 – 24V DC jack is covered if the internal 2-pin power connector is to be used.

 

Datasheet

Datasheet

Ordering Options/Notes

3308939A: MF10-20 without onboard TPM 3308939B: MF10-22 with onboard TPM Cables included: SATA Power Cable, COM Cable, SATA Data Cable   *External Power Supply – the board can be powered with a +12 - 24V external power supply though a DC connector on the back panel. The rear +12 - 24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12 - 24V and the shell is GND. A minimum of 90 Watts power adapter is recommended. Internal Power Supply – the board can alternatively be powered via the internal +12 - 24V 2-pin power connector, where pin 1 is +12 - 24V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply. Caution: There is no isolation circuitry between the external +12 - 24V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12 - 24V DC jack is covered if the internal 2-pin power connector is to be used.  

Some of our successful brand partners

Acrosser logo

Already know what you need? Request a quote.

We can customize the perfect solution to meet your embedded computing needs.

    • This field is for validation purposes and should be left unchanged.

    Latest Articles

    Featured Article
    PH12FEI – Thin Mini-ITX Motherboard with Intel® Coffee Lake CPU Support The Strange Rationale of Intel Codenames

    While official Intel processor names are humdrum and boring (i7, i9, etc.), the unofficial codenames used by the company are rather unique. From lakes to cities, landmarks to rivers, Intel has taken inspiration from many places. Let’s take a look at how these codenames have evolved over the years. What is an Intel Codename? Official […]

    View Article

    Company News

    • Intel Hybrid Core: Gimmick or the Future?

      August 1, 2023

      With the 12th Gen Alder Lake lineup, Intel has introduced a new hybrid core architecture. But what exactly does a hybrid core entail? And what does it mean for embedded computing? Why the Move to Hybrid Cores? The never-ending semiconductors arms race has revolved around packing more and more cores into a single chip since […]

      View Article
    • Fanless PC for Networking Systems

      June 1, 2023

      Surveillance and other networking applications require a very specific combination of features – a large number of LAN ports, a low-power processor, and fanless cooling for a rugged, compact chassis. The HBJC903i05 checks all these boxes, making it the ideal PC for powering any networking-heavy interface. Let’s take a deeper look at its features. 6 […]

      View Article
    View All News

    From the Blog

    • The Strange Rationale of Intel Codenames

      November 21, 2023

      While official Intel processor names are humdrum and boring (i7, i9, etc.), the unofficial codenames used by the company are rather unique. From lakes to cities, landmarks to rivers, Intel has taken inspiration from many places. Let’s take a look at how these codenames have evolved over the years. What is an Intel Codename? Official […]

      View Article
    • The Importance of MTBF for Industrial Computers

      November 3, 2023

      Component manufacturers compete with one another to release components with a higher MTBF. But what does MTBF mean, and why does it even matter? The Difficulty in Measuring Reliability of an Electronic Device Measuring a device’s reliability can be tricky. Hardware faults and technical breakdowns can be notoriously random, where one device runs for years […]

      View Article
    View all Blogs